
M3000 Bar Code Reader User's Guide
6-18
Code 11
Decoder
ON Enable reading Code 11 labels.
OFF * Disable reading Code 11 labels.
2 Check Dig
ON Two valid check digits are required for each label.
OFF * One valid check digit is required for each label.
Send Check 1
ON Transmit the FIRST CHECK DIGIT.
OFF * Do not transmit the FIRST CHECK DIGIT.
Send Check 2
ON Transmit the SECOND CHECK DIGIT.
OFF * Do not transmit the SECOND CHECK DIGIT.
Termination Character
The optional TERMINATION CHARACTER is transmitted at the end of the bar code data. This
option is applicable only during non portable mode operation. You can select from the following
termination character options:
Termination Char
NONE
TAB (ASCII 09)
CR* (CARRIAGE RETURN, ASCII 13)
LF (LINE FEED, ASCII 10)
CR + LF (CARRIAGE RETURN & LINE FEED, ASCII 13 & ASCII 10)
USER Selects the user defined termination character (00H - F9H).
User Term
Valid only if Termination Char is set to USER.
Override
ON If any control character or special character (i.e., function key, arrow key, etc.) is
embedded in the bar code data, the Preamble, Postamble, and the TERMINATION
CHARACTER are not transmitted.
OFF * The Preamble, Postamble TERMINATION CHARACTER will be transmitted with all
bar code data.
Kommentare zu diesen Handbüchern