AML M3000 Betriebsanweisung PDF herunterladen (Seite 45)

5Programming

5-3

Exit Program

Entry?

2. Press YES. The M3000 will verify the program you have created and display an error

message if any of the following have occurred:

• no inputs have been defined for the program

• no operator inputs have been defined for the program

• a loop has been created with no operator input.

3. If you have just created a new program, the M3000 display prompts:

Save New

Program?

4. Press YES. The display shows:

Edit Program

>*New Program*

5. Press EXIT. The display shows:

Portable Mode

Select Function

Programming Tutorial

The information that follows explains the step-by-step procedures used to develop a practical

inventory program. This sample program uses many of the powerful, and some of the less obvious

features, that are built into the M3000, and is designed to be used with DOS on a PC. When a data

file created by this program is transmitted in the Keyboard Wedge Mode, or the RS232 Serial

Mode using SOFTCOM keyboard emulation software, the Start of File Text outputs a DOS C:

prompt and carriage return. The DOS Copy Con command creates a file named "datafile.dat". A

final carriage return follows the file name.

To ensure that SOFTCOM properly translates control codes from this program, make sure the

following settings have been made to the SOFTCOM using the SCONFIG.EXE Program:

Function Keys: Use Both

Special Keys: Use Both

Other SOFTCOM settings must match the settings of your M3000's Transmit Setup.

While using this tutorial, we recommend you refer to Sample Program Chart following the

Appendix. This chart outlines and summarizes the program you are about to create, and will help

you follow your progress through the creation of the program.

The name of this program is "EXAMPLE". "EXAMPLE" consists of 5 input definition sequences.

Of these five input definition sequences one is a Header, the remaining four are Record Inputs that

combine to create a loop.

Header: User ID

Record Inputs: Item #

Qty

LOC

MM/DD/YY HH:MM

Date /Time Stamp (automatic input that the

operator does not see)

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 155 156

Kommentare zu diesen Handbüchern

Keine Kommentare

AML M3000 Betriebsanweisung Seite 45

Kommentare zu diesen Handbüchern