AML M3000 Betriebsanweisung PDF herunterladen (Seite 25)

M5000 Portable Data Terminal American Microsystems, Ltd.

Code 93

Options

Option Setting Description

Decoder *On Enables/disables reading Code 93 bar codes.

Concatenate *Off Enables/disables concatenate mode.



Note: The concatenate mode allows the M5000 PDT to accumulate multiple Code 93 bar codes in the

buffer and sends them to the computer as though a single bar code. When a Code 93 bar code

containing a leading space is read, the M5000 PDT beeps twice and buffers the data without

transmission. This process continues until a Code 93 bar code without a leading space is read or 128

characters are buffered. A Code 93 bar code bar code that only contains dashes will clear the buffer.

MSI/Plessey Options

Option Setting Description

Decoder *Off Enables/disables reading MSI/Plessey bar codes.

2nd

Check Digit *Off Two valid check digits are required for each bar

code. The first check digit can be either mod 10 or

11, the second must always be mod 10.

Mod 11 Check (Digit) *Off Determines whether mod 11 or mod 10 is used as

the first check digit.

Send Check 1 *Off Transmits the first check digit.

Send Check 2 *Off Transmits the second check digit.

ISBN *Off Enables/disables reading Modified Plessey ISBN bar

codes. (Only eleven-digit ISBN bar codes can be

read.)

Code 11 Options

Option Setting Description

Decoder *Off Enables/disables reading Code 11 bar codes.

Chk Digit *Off Two valid check digits are required for each bar

code.

Send Check 1 *Off Transmits the first check digit.

Send Check 2 *Off Transmits the second check digit.

*Notes default

Termination Char

—

The optional Termination Char is transmitted at the end of the

bar code data and applicable only during non-portable mode operation (refer to Non-Portable

Mode on page 31). Select one of the following options:

None

Tab (ASCII 09; hex /09)

CR (carriage return, ASCII 13; hex /0D)(default)

LF (line feed, ASCII 10; hex /0A)

CR + LF (carriage return and line feed, ASCII 13 and ASCII 10; hex /0D/0A)

User defined termination character (00H-F9H).

User Termination

—

valid only if the Termination Char option is set to User. Default is

set to 00H.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 37 38

Kommentare zu diesen Handbüchern

Keine Kommentare

AML M3000 Betriebsanweisung Seite 25

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Barcodeleser AML M3000