AML M3000 Betriebsanweisung PDF herunterladen (Seite 12)

American Microsystems, Ltd. M5000 Portable Data Terminal

Using the M5100 Keyboard Wedge

The M5100 Keyboard Wedge is an optional accessory of the M5000 Portable Data Terminal. It

interfaces between a standard IBM compatible keyboard and your personal computer. The M5100

Keyboard Wedge transmits data to the

computer as if it were typed from the

keyboard.

The advantage of using a keyboard wedge

is that software is not needed for

connectivity. The M5100 Keyboard Wedge

interface connects between the keyboard

and the PC with a Y-cable. The M5000 PDT

connects to the wedge to upload data. The

computer remains fully functional while

data is transmitted via the keyboard directly

into your computer’s application. In

addition, the M5100 Keyboard Wedge has

the ability to convert standard RS-232 data

into keyboard data.

M5100 Wedge Programmer Software is

included with the purchase of the M5100

Keyboard Wedge. This application allows

for modification of keyboard wedge settings

such as transmit speed, keyboard type and

RS-232 conversion settings. In most cases, the manufacturer default settings programmed into the

M5100 Keyboard Wedge are acceptable and changes to the wedge programmer settings are not

necessary.

How to connect the M5100 Keyboard Wedge to your computer:

1. Turn off the power to your computer.

Warning!

Failure to terminate the power can permanently damage the system.

2. Unplug the keyboard connector from the back of your computer and plug it into the female end

of the Y-cable.

3. Plug the male end of the Y-cable into your keyboard port.

4. Connect the wedge to the 9-pin connector on the Y-cable.

5. Connect the interface cable to the 9-pin male connector on the wedge.

6. Connect the RJ45 10-pin connector end (resembles a telephone jack) of the interface cable to the

bottom of the M5000 PDT.

7. Turn on the power to your computer. In keyboard wedge mode, power to the M5000 PDT is

automatically received from the PC.

Using the M5100 Wedge Programmer

When the keyboard wedge cable is connected, the M5000 PDT switches to the keyboard wedge

mode automatically. During keyboard wedge mode the M5000 PDT receives all its power from the

keyboard port and does not use its internal battery. The M5000 PDT turns on and off with the host

computer.

The M5000 Utilities automatically includes the M5000 Programmer, M5100 Wedge Programmer,

and Softcom. You may run these programs by selecting the appropriate icon.

Follow these steps to initiate the M5100 Wedge Programmer software:

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 37 38

Kommentare zu diesen Handbüchern

Keine Kommentare

AML M3000 Betriebsanweisung Seite 12

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Barcodeleser AML M3000